PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 168DE1-1-12
168DE1-1-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL INTERNALLY MOLDED-IN REINFORCEMENT, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, construction: SOLID, fsc_application_data: AIR CONDITIONING UNIT, housing_bore_diameter: 1.250 INCHES NOMINAL IN, accommodated_shaft_diameter: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-752-8942, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
168DE1-1-12
NSN: 5330-00-752-8942
FSC: 5330
CAGE: 28398 — ENERSYS INC. DIV HERTNER (USA)
SPECIFICATIONS
materialSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
constructionSOLID
fsc_application_dataAIR CONDITIONING UNIT
housing_bore_diameter1.250 INCHES NOMINAL IN
accommodated_shaft_diameter0.625 INCHES NOMINAL IN
NSN5330-00-752-8942
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 168DE1-1-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: AIR CONDITIONING UNIT
•
MATERIAL: STEEL INTERNALLY MOLDED-IN REINFORCEMENT
•
HOUSING BORE DIAMETER: 1.250 INCHES NOMINAL IN
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 0.625 INCHES NOMINAL IN
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS (FLIS)
FSC APPLICATION DATAAIR CONDITIONING UNIT
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
HOUSING BORE DIAMETER1.250 INCHES NOMINAL IN
MATERIALSTEEL SPRING
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER0.625 INCHES NOMINAL IN
CONSTRUCTIONSOLID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
6324-3Interchangeable
interchangeable cross-reference
interchangeable
1160Interchangeable
interchangeable cross-reference
interchangeable
12750Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 168DE1-1-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 168DE1-1-12?
168DE1-1-12 is a SEAL,PLAIN.
What parts can replace 168DE1-1-12?
There are 3 known substitutes for 168DE1-1-12: 6324-3, 1160, 12750. Substitute compatibility should be verified for your specific system.
What is the NSN for 168DE1-1-12?
168DE1-1-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-752-8942. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 168DE1-1-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026