The Lever,remote Control, cataloged under National Stock Number 1680-00-830-9745, is classified within Federal Supply Class 1680 (Miscellaneous Aircraft Accessories and Components) of the Aircraft Components and Accessories group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 1680-00-830-9745 |
| Item Name | Lever,remote Control |
| FSC / FSG | 1680 / 16 — Miscellaneous Aircraft Accessories and Components |
| Status | ACTIVE |
| Link End Thickness | 0.500 INCHES NOMINAL IN |
| Link End Hole Diameter | 0.3745 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM IN |
| Shaft End Thickness | 0.500 INCHES NOMINAL IN |
| Style Designator | FLAT, ONE HOLE LINK END |
| Material Document and Classification | QQ-A-367, COMP 2014, T6 FED SPEC SINGLE MATERIAL RESPONSE |
| Bore Type | SPLINED |
| Shaft Securing Method | SPLINE |
| Spline Quantity | 27 |
| Center to Center Distance Between Link and Shaft Holes | 3.250 INCHES NOMINAL IN |
| Surface Treatment | ANODIZE |
| Minor Diameter | 0.812 INCHES MINIMUM AND 0.816 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY |
| Major Diameter | 0.894 INCHES MINIMUM AND 0.908 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL Q — CCL Item — Commerce Control List |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 204-011-313-001 | 5/2 Secondary reference U.S. Government activity |
| 204-011-313-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 1680-00-830-9745 is a Lever,remote Control, classified under FSC 1680, Miscellaneous Aircraft Accessories and Components. Status: active.
Key specifications for 1680-00-830-9745: Link End Thickness: 0.500 INCHES NOMINAL IN; Link End Hole Diameter: 0.3745 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM IN; Shaft End Thickness: 0.500 INCHES NOMINAL IN; Style Designator: FLAT, ONE HOLE LINK END. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 1680-00-830-9745 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.