The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OR STEEL COMP 304L, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN, first_leg_length: 0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-122-3270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
167C2923
NSN:5340-01-122-3270 FSC:5340 — Hardware, Commercial CAGE:05606 — GENERAL DYNAMICS-OTS, INC. DIV ORDNANCE AND TACTICAL SYSTEMS (USA)
SPECIFICATIONS
material
STEEL COMP 304 OR STEEL COMP 304L
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
first_leg_length
0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
second_leg_style
SQUARE
second_leg_width
1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
special_features
CLINCH NUT IN SECOND LEG
style_designator
ANGLE
second_leg_length
0.810 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
surface_treatment
PASSIVATE
first_leg_thickness
0.063 INCHES NOMINAL IN
NSN
5340-01-122-3270
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.285 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.2800 INCHES MINIMUM AND 0.2850 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.285 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.2800 INCHES MINIMUM AND 0.2850 INCHES MAXIMUM IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 167C2923?
167C2923 is a BRACKET,ANGLE.
What parts can replace 167C2923?
There is 1 known substitute for 167C2923: 10112422. Substitute compatibility should be verified for your specific system.
What is the NSN for 167C2923?
167C2923 is cataloged in the U.S. Government catalog under NSN 5340-01-122-3270. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.