PartsTable
Technical Data Sheet
Download PDF

16787P11 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

16787P11: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.3085 INCHES NOMINAL IN, bore_diameter: 2.2500 INCHES NOMINAL IN, style_designator: STEEP ANGLE, cone_corner_radius: 0.1400 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-819-3032, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16787P11
NSN: 3110-00-819-3032
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 27618 — TAYLOR MACHINE WORKS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.3085 INCHES NOMINAL IN
bore_diameter2.2500 INCHES NOMINAL IN
style_designatorSTEEP ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-819-3032
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 16787P11 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STEEP ANGLE
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
CONE WIDTH: 1.3085 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTEEP ANGLE
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
CONE WIDTH1.3085 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.2500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
136299Reference document
Same NSN cross-reference
Reference document — Secondary reference
169373Reference document
Same NSN cross-reference
Reference document — Secondary reference
91262R91Reference document
Same NSN cross-reference
Reference document — Secondary reference
84658Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
84685Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 16787P11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16787P11?
16787P11 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 16787P11?
There are 5 known substitutes for 16787P11: 136299, 169373, 91262R91 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16787P11?
16787P11 is cataloged in the U.S. Government catalog under NSN 3110-00-819-3032. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16787P11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.