PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 167-7409321-38
167-7409321-38 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.500 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.280 INCHES NOMINAL IN, mounting_method: BOLT, style_designator: SPECIAL, loop_opening_width: 4.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-509-3628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
167-7409321-38
NSN: 5340-01-509-3628
FSC: 5340
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width1.500 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.280 INCHES NOMINAL IN
hole_quantity2
mounting_methodBOLT
style_designatorSPECIAL
loop_opening_width4.750 INCHES NOMINAL IN
material_thickness0.060 INCHES NOMINAL IN
end_item_identificationLDT HATCH ASSEMBLY
distance_from_end_to_nearest_bend3.000 INCHES NOMINAL IN
material_document_and_classificationSAE-AMS-5528-F-1994 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-509-3628
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 167-7409321-38 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPECIAL
•
WIDTH: 1.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.280 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
HOLE QUANTITY: 2
•
MOUNTING METHOD: BOLT
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSPECIAL
WIDTH1.500 INCHES NOMINAL IN
END ITEM IDENTIFICATIONLDT HATCH ASSEMBLY
HOLE DIAMETER0.280 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
HOLE QUANTITY2
MOUNTING METHODBOLT
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AMS-5528-F-1994 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DISTANCE FROM END TO NEAREST BEND3.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
FC7739Interchangeable
interchangeable cross-reference
interchangeable
7409321Interchangeable
interchangeable cross-reference
interchangeable
111468HInterchangeable
interchangeable cross-reference
interchangeable
167-7409321-10Interchangeable
interchangeable cross-reference
interchangeable
7409320Interchangeable
interchangeable cross-reference
interchangeable
B541-1110-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 167-7409321-38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 167-7409321-38?
167-7409321-38 is a CLIP,SPRING TENSION.
What parts can replace 167-7409321-38?
There are 22 known substitutes for 167-7409321-38: FC7739, 7409321, 111468H and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 167-7409321-38?
167-7409321-38 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-509-3628. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 167-7409321-38

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026