PartsTable
Technical Data Sheet
Download PDF

167-7106770-9 — SLEEVE,CONNECTING,NON-METALLIC

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

167-7106770-9: SLEEVE,CONNECTING,NON-METALLIC.

The SLEEVE,CONNECTING,NON-METALLIC is a the manufacturer industrial component. Key specifications include material: PLASTIC, overall_length: 7.300 INCHES NOMINAL IN, overall_diameter: 4.790 INCHES MINIMUM AND 4.810 INCHES MAXIMUM IN, end_item_identification: NSSN CLASS SUBMARINE LOGISTICS ESCAPE TRUNK LOWER HATCH HINGE DETAIL - HATCH ASSY - WASP CLASS (LHD), part_name_assigned_by_controlling_agency: SLEEVE. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-496-0084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
167-7106770-9
NSN: 4730-01-496-0084
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialPLASTIC
overall_length7.300 INCHES NOMINAL IN
overall_diameter4.790 INCHES MINIMUM AND 4.810 INCHES MAXIMUM IN
end_item_identificationNSSN CLASS SUBMARINE LOGISTICS ESCAPE TRUNK LOWER HATCH HINGE DETAIL - HATCH ASSY - WASP CLASS (LHD)
part_name_assigned_by_controlling_agencySLEEVE
NSN4730-01-496-0084
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 167-7106770-9 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 4.790 INCHES MINIMUM AND 4.810 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER4.790 INCHES MINIMUM AND 4.810 INCHES MAXIMUM IN
OVERALL LENGTH7.300 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSLEEVE
END ITEM IDENTIFICATIONNSSN CLASS SUBMARINE LOGISTICS ESCAPE TRUNK LOWER HATCH HINGE DETAIL - HATCH ASSY - WASP CLASS (LHD)
MATERIALPLASTIC
SUBSTITUTES & CROSS-REFERENCES 2
167-7106770Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
H547-0264-9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 167-7106770-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 167-7106770-9?
167-7106770-9 is a SLEEVE,CONNECTING,NON-METALLIC.
What parts can replace 167-7106770-9?
There are 2 known substitutes for 167-7106770-9: 167-7106770, H547-0264-9. Substitute compatibility should be verified for your specific system.
What is the NSN for 167-7106770-9?
167-7106770-9 is cataloged in the U.S. Government catalog under NSN 4730-01-496-0084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 167-7106770-9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.