167-7066792-22 — SPRING,HELICAL,TORSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

167-7066792-22: SPRING,HELICAL,TORSION.

The SPRING,HELICAL,TORSION is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 600 OVERALL, end_style: HINGE END FIRST END, end_length: 1.000 INCHES NOMINAL SECOND END IN, inside_diameter: 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN, style_designator: SINGLE TORSION LEFT HAND, spring_free_length: 0.600 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-01-497-8700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

167-7066792-22

NSN: 5360-01-497-8700
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	NICKEL ALLOY 600 OVERALL
end_style	HINGE END FIRST END
end_length	1.000 INCHES NOMINAL SECOND END IN
coil_quantity	3
inside_diameter	0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
style_designator	SINGLE TORSION LEFT HAND
spring_free_length	0.600 INCHES NOMINAL IN
coil_helix_direction	LEFT-HAND
spring_deflection_rate	16.000 POUNDS PER INCH MINIMUM AND 27.000 POUNDS PER INCH MAXIMUM LBS
end_angular_relationship	END W/LH HELIX OF COIL ANGLED TO CENTER SECTION
spring_free_outside_diameter	0.784 INCHES NOMINAL IN
end_length_from_first_bend_to_second_bend_or_end	1.000 INCHES NOMINAL SECOND END IN
NSN	5360-01-497-8700

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.784 INCHES NOMINAL IN

•

END STYLE: STRAIGHT BEND END (RIGHT) SECOND END

•

END LENGTH: 1.000 INCHES NOMINAL SECOND END IN

•

STYLE DESIGNATOR: SINGLE TORSION LEFT HAND

•

SPRING FREE LENGTH: 0.600 INCHES NOMINAL IN

•

SPRING DEFLECTION RATE: 16.000 POUNDS PER INCH MINIMUM AND 27.000 POUNDS PER INCH MAXIMUM LBS

•

INSIDE DIAMETER: 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.784 INCHES NOMINAL IN
END STYLE	STRAIGHT BEND END (RIGHT) SECOND END
END STYLE	HINGE END FIRST END
END LENGTH	1.000 INCHES NOMINAL SECOND END IN
STYLE DESIGNATOR	SINGLE TORSION LEFT HAND
SPRING FREE LENGTH	0.600 INCHES NOMINAL IN
SPRING DEFLECTION RATE	16.000 POUNDS PER INCH MINIMUM AND 27.000 POUNDS PER INCH MAXIMUM LBS
INSIDE DIAMETER	0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
END LENGTH FROM FIRST BEND TO SECOND BEND OR END	1.000 INCHES NOMINAL SECOND END IN
COIL QUANTITY	3

OTHER ITEMS IN FSC 5360 — Coil, Flat, Leaf, and Wire Springs

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5360-00-001-1842 5360-00-001-1945 5360-00-001-2010 5360-00-001-3865 5360-00-001-3950 5360-00-001-4650 5360-00-001-4664 5360-00-001-4703

SUBSTITUTES & CROSS-REFERENCES 2

H547-1803-76Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

H547-1117-22Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 167-7066792-22?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 167-7066792-22?

167-7066792-22 is a SPRING,HELICAL,TORSION.

What parts can replace 167-7066792-22?

There are 2 known substitutes for 167-7066792-22: H547-1803-76, H547-1117-22. Substitute compatibility should be verified for your specific system.

What is the NSN for 167-7066792-22?

167-7066792-22 is cataloged in the U.S. Government catalog under NSN 5360-01-497-8700. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

167-7066792-22 — SPRING,HELICAL,TORSION

Request a Quote — 167-7066792-22