PartsTable
Technical Data Sheet
Download PDF

167-7066791-A5 — HANDLE,DOOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

167-7066791-A5: HANDLE,DOOR.

The HANDLE,DOOR is a the manufacturer industrial component. Key specifications include shaft_length: 6.080 INCHES NOMINAL IN, handle_height: 1.375 INCHES NOMINAL IN, major_diameter: 1.125 INCHES NOMINAL IN, overall_length: 4.380 INCHES NOMINAL IN, mounting_method: PIN(S), effective_length: 0.380 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-499-2251, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
167-7066791-A5
NSN: 5340-01-499-2251
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
shaft_length6.080 INCHES NOMINAL IN
handle_height1.375 INCHES NOMINAL IN
major_diameter1.125 INCHES NOMINAL IN
overall_length4.380 INCHES NOMINAL IN
mounting_methodPIN(S)
effective_length0.380 INCHES NOMINAL IN
handle_clearance2.000 INCHES NOMINAL IN
special_featuresASSEMBLY INCLUDES ONE EACH: HANDLE, SPINDLE, SPRING, SPINDLE PIN, RETAINER NUT, WASHER, AND SETSCREW, 0.138-32UNC-3AX0.250
style_designatorL
small_end_diameter0.375 INCHES NOMINAL IN
width_across_flats0.648 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
integral_shaft_styleROUND W/FLATS
NSN5340-01-499-2251
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 167-7066791-A5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.648 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
•
INTEGRAL SHAFT STYLE: ROUND W/FLATS
•
SHAFT ACCOMMODATION STYLE: ROUND
•
HANDLE HEIGHT: 1.375 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 0.500 INCHES NOMINAL IN
•
MOUNTING FACILITY LENGTH: 1.880 INCHES NOMINAL IN
•
MOUNTING METHOD: PIN(S)
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.648 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
INTEGRAL SHAFT STYLEROUND W/FLATS
SHAFT ACCOMMODATION STYLEROUND
HANDLE HEIGHT1.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH0.500 INCHES NOMINAL IN
MOUNTING FACILITY LENGTH1.880 INCHES NOMINAL IN
MOUNTING METHODPIN(S)
STYLE DESIGNATORL
OVERALL LENGTH4.380 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 167-7066791-A5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 167-7066791-A5?
167-7066791-A5 is a HANDLE,DOOR.
What is the NSN for 167-7066791-A5?
167-7066791-A5 is cataloged in the U.S. Government catalog under NSN 5340-01-499-2251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 167-7066791-A5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.