PartsTable
Technical Data Sheet
Download PDF

167-7066788-14 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

167-7066788-14: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.562 INCHES NOMINAL IN, first_hole_diameter: 0.141 INCHES NOMINAL IN, pin_overall_diameter: 0.6250 INCHES NOMINAL IN, second_hole_diameter: 0.141 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-236-8365, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
167-7066788-14
NSN: 5315-00-236-8365
NIINs: 002368365, 014872858
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
first_end_styleCHAMFERED
pin_overall_length2.562 INCHES NOMINAL IN
first_hole_diameter0.141 INCHES NOMINAL IN
pin_overall_diameter0.6250 INCHES NOMINAL IN
second_hole_diameter0.141 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
end_item_identificationACCESS HATCH BATTERY TANK; LOS ANGELES CLASS SSN (688)
material_document_and_classificationQQ-S-763, COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-236-8365
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 167-7066788-14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
•
STYLE DESIGNATOR: STANDARD
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
DIAMETER: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY POINT STYLE
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
UNDERLOOP LENGTH: 2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OVERALL
TECHNICAL CHARACTERISTICS
HARDNESS RATING55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
STYLE DESIGNATORSTANDARD
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
DIAMETER0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY POINT STYLE
SURFACE TREATMENTPASSIVATE OVERALL
UNDERLOOP LENGTH2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OVERALL
POINT TYPEEXTENDED PRONG SQUARE CUT
SUBSTITUTES & CROSS-REFERENCES 8
MS24665-380Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5315PL1739932Reference document
Same NSN cross-reference
Reference document — Informative reference only
709-5343924 ITEM 144Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
NASM24665Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
H545-1304-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
122-7270389 PC 37Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 167-7066788-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 167-7066788-14?
167-7066788-14 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 167-7066788-14?
There are 8 known substitutes for 167-7066788-14: MS24665-380, 5315PL1739932, 709-5343924 ITEM 144 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 167-7066788-14?
167-7066788-14 is cataloged in the U.S. Government catalog under NSN 5315-00-236-8365. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 167-7066788-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.