PartsTable
Technical Data Sheet
Download PDF

167-5106739 DETAIL 38A — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

167-5106739 DETAIL 38A: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL PIN, chamfer_angle: 45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED, hole_diameter: 0.140 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, chamfer_length: 0.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 14.500 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-463-7505, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
167-5106739 DETAIL 38A
NSN: 5340-01-463-7505
FSC: 5340 — Hardware, Commercial
CAGE: 64513 — BOLLINGER SHIPYARDS LOCKPORT, L.L.C. (USA)
SPECIFICATIONS
materialSTEEL PIN
chamfer_angle45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
hole_diameter0.140 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
chamfer_length0.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_length14.500 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
overall_diameter0.630 INCHES NOMINAL IN
special_featuresHINGE PIN, 1 REQUIRED PER HATCH
drilled_hole_locationBOTH ENDS
end_item_identificationUSED ON PATROL COASTAL WATER TIGHT DOORS AND HATCHES 26" X 33" CLEAR OPENING, 6 DOG
mounting_facility_diameter0.140 INCHES NOMINAL IN
mounting_facility_quantity2
NSN5340-01-463-7505
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 167-5106739 DETAIL 38A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.140 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
CHAMFER LENGTH: 0.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OVERALL DIAMETER: 0.630 INCHES NOMINAL IN
•
DRILLED HOLE LOCATION: BOTH ENDS
•
MOUNTING METHOD: UNTHREADED HOLE(S)
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.140 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
CHAMFER LENGTH0.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL DIAMETER0.630 INCHES NOMINAL IN
DRILLED HOLE LOCATIONBOTH ENDS
MOUNTING METHODUNTHREADED HOLE(S)
OVERALL LENGTH14.500 INCHES NOMINAL IN
SPECIAL FEATURESHINGE PIN, 1 REQUIRED PER HATCH
HOLE DIAMETER0.140 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
CHAMFER ANGLE45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
SUBSTITUTES & CROSS-REFERENCES 1
5106739Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 167-5106739 DETAIL 38A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 167-5106739 DETAIL 38A?
167-5106739 DETAIL 38A is a ROD,STRAIGHT,HEADLESS.
What parts can replace 167-5106739 DETAIL 38A?
There is 1 known substitute for 167-5106739 DETAIL 38A: 5106739. Substitute compatibility should be verified for your specific system.
What is the NSN for 167-5106739 DETAIL 38A?
167-5106739 DETAIL 38A is cataloged in the U.S. Government catalog under NSN 5340-01-463-7505. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 167-5106739 DETAIL 38A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.