PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1669099
1669099 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q PACKING, construction: ONE-PIECE, outside_diameter: 0.375 INCHES NOMINAL IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.050 INCHES NOMINAL IN, packing_inside_diameter: 0.159 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-773-3704, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1669099
NSN: 5330-00-773-3704
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q PACKING
constructionONE-PIECE
outside_diameter0.375 INCHES NOMINAL IN
surface_treatmentCADMIUM RETAINER
retainer_thickness0.050 INCHES NOMINAL IN
packing_inside_diameter0.159 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter0.066 INCHES NOMINAL IN
NSN5330-00-773-3704
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1669099 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING INSIDE DIAMETER: 0.159 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE CLASS Q PACKING
•
CONSTRUCTION: ONE-PIECE
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.066 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM RETAINER
•
RETAINER THICKNESS: 0.050 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PACKING INSIDE DIAMETER0.159 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q PACKING
CONSTRUCTIONONE-PIECE
PACKING RING CROSS-SECTIONAL DIAMETER0.066 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM RETAINER
RETAINER THICKNESS0.050 INCHES NOMINAL IN
OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
90-1Interchangeable
interchangeable cross-reference
interchangeable
3-609Interchangeable
interchangeable cross-reference
interchangeable
TMT-99-1Interchangeable
interchangeable cross-reference
interchangeable
1-1-2CCC991-10Interchangeable
interchangeable cross-reference
interchangeable
2310-1602Interchangeable
interchangeable cross-reference
interchangeable
991Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1669099?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1669099?
1669099 is a PACKING WITH RETAINER.
What parts can replace 1669099?
There are 19 known substitutes for 1669099: 90-1, 3-609, TMT-99-1 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1669099?
1669099 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-773-3704. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1669099

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026