1668255-10 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

1668255-10: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, material: PLASTIC POLYESTER AND GLASS FIBER BAND, overall_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-054-9675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1668255-10

NSN: 5340-01-054-9675
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

diameter	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
material	PLASTIC POLYESTER AND GLASS FIBER BAND
overall_width	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.040 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
loop_inside_diameter	0.625 INCHES NOMINAL IN
material_document_and_classification	L-P-383 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.859 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.641 INCHES NOMINAL IN
NSN	5340-01-054-9675

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: L-P-383 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.859 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.641 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	L-P-383 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OVERALL WIDTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.040 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.859 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.641 INCHES NOMINAL IN
MATERIAL	PLASTIC POLYESTER AND GLASS FIBER BAND
LOOP INSIDE DIAMETER	0.625 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 1

10-FFReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy 1668255-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1668255-10?

1668255-10 is a CLAMP,LOOP.

What parts can replace 1668255-10?

There is 1 known substitute for 1668255-10: 10-FF. Substitute compatibility should be verified for your specific system.

What is the NSN for 1668255-10?

1668255-10 is cataloged in the U.S. Government catalog under NSN 5340-01-054-9675. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1668255-10 — CLAMP,LOOP

Request a Quote — 1668255-10