PartsTable
Technical Data Sheet
Download PDF

16644 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
Legrand · MRO · MRO_GENERAL
PRODUCT OVERVIEW

16644: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include length: 355.0 MILLIMETERS NOMINAL MM, material: STEEL COMP 6150 OVERALL, body_length: 1.250 INCHES NOMINAL IN, body_diameter: 0.250 INCHES NOMINAL IN, hole_diameter: 0.480 INCHES NOMINAL IN, hole_quantity: 14. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-435-0453, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 16644
NSN: 5310-00-435-0453
NIINs: 004350453, 005139946, 014230057, 015916699
FSC: 5310 — Nuts and Washers
CAGE: 71895 — COLLINS ENGINE NOZZLES, INC (USA)
SPECIFICATIONS
length355.0 MILLIMETERS NOMINAL MM
materialSTEEL COMP 6150 OVERALL
body_length1.250 INCHES NOMINAL IN
body_diameter0.250 INCHES NOMINAL IN
hole_diameter0.480 INCHES NOMINAL IN
hole_quantity14
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
overall_height0.063 INCHES NOMINAL IN
terminal_length1.500 INCHES NOMINAL IN
outside_diameter0.984 INCHES NOMINAL IN
special_features4.5 MM LCP PROXIMAL FEMUR PLATE; 14 HOLES; LENGTH: 355 MM; LEFT; END ITEM: PLATE SET, BONE, COMPRESSION, NSN 6515-01-584-1209 MM
NSN5310-00-435-0453
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 16644 · Legrand ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPRING TENSION
•
OUTSIDE DIAMETER: 0.984 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0354 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 6150 OVERALL
•
HOLE DIAMETER: 0.480 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.063 INCHES NOMINAL IN
STYLE DESIGNATORSPRING TENSION
OUTSIDE DIAMETER0.984 INCHES NOMINAL IN
MATERIAL THICKNESS0.0354 INCHES NOMINAL IN
MATERIALSTEEL COMP 6150 OVERALL
HOLE DIAMETER0.480 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
11644458-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
Manufacturer release date (catalog record)2015-01-01
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 16644?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16644?
16644 is a RESISTOR,FIXED,WIRE WOUND,INDUCT manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 16644?
There is 1 known substitute for 16644: 11644458-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 16644?
16644 is cataloged in the U.S. Government catalog under NSN 5310-00-435-0453. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16644

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.