PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 166315
166315 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TERMINAL,FEEDTHRU is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE INSULATION, overall_height: 0.443 INCHES0.443 INCHES IN, largest_diameter: 0.080 INCHES ALL ENDS IN, overall_diameter: 0.172 INCHES0.172 INCHES IN, special_features: STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200, basic_shape_style: NONTUBULAR ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-110-9676, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
166315
NSN: 5330-00-110-9676
FSC: 5330
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE INSULATION
overall_height0.443 INCHES0.443 INCHES IN
largest_diameter0.080 INCHES ALL ENDS IN
overall_diameter0.172 INCHES0.172 INCHES IN
special_featuresSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
basic_shape_styleNONTUBULAR ROUND
surface_treatmentTIN CONDUCTOR ACCOMMODATION SINGLE LAYER
major_bushing_length0.040 INCHES IN
minor_bushing_length0.100 INCHES IN
mounting_method_stylePRESS FIT
turret_minor_diameter0.040 INCHES ALL ENDS IN
major_bushing_diameter0.172 INCHES IN
NSN5330-00-110-9676
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 166315 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
0112017Interchangeable
interchangeable cross-reference
interchangeable
69001-8103Interchangeable
interchangeable cross-reference
interchangeable
82-1510-P11-101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 166315?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 166315?
166315 is a TERMINAL,FEEDTHRU.
What parts can replace 166315?
There are 3 known substitutes for 166315: 0112017, 69001-8103, 82-1510-P11-101. Substitute compatibility should be verified for your specific system.
What is the NSN for 166315?
166315 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-110-9676. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 166315

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026