PartsTable
Technical Data Sheet
Download PDF

166247-1 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

166247-1: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.212 INCHES NOMINAL IN, material: UNABLE TO DECODE, tongue_width: 1.130 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN, overall_width: 1.280 INCHES NOMINAL IN, tongue_length: 0.150 INCHES NOMINAL IN, overall_length: 0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-303-8911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
166247-1
NSN: 5340-01-303-8911
FSC: 5340 — Hardware, Commercial
CAGE: 55820 — RTX CORPORATION DIV PRATT & WHITNEY (USA)
SPECIFICATIONS
height0.212 INCHES NOMINAL IN
materialUNABLE TO DECODE
tongue_width1.130 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
overall_width1.280 INCHES NOMINAL IN
tongue_length0.150 INCHES NOMINAL IN
overall_length0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
mounting_facilityUNTHREADED HOLE(S)
material_thickness0.050 INCHES NOMINAL IN
first_surface_hole_size0.129 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN
first_surface_hole_quantity2
NSN5340-01-303-8911
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 166247-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 1.130 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
•
FIRST SURFACE HOLE SIZE: 0.129 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
HEIGHT: 0.212 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
TONGUE WIDTH1.130 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
OVERALL LENGTH0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
OVERALL WIDTH1.280 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.129 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
HEIGHT0.212 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
MATERIALUNABLE TO DECODE
TONGUE LENGTH0.150 INCHES NOMINAL IN
FIRST SURFACE HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 166247-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 166247-1?
166247-1 is a STRIKE,CATCH.
What is the NSN for 166247-1?
166247-1 is cataloged in the U.S. Government catalog under NSN 5340-01-303-8911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 166247-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.