PartsTable
Technical Data Sheet
PartsTable / O-RING / 16606A54-213
16606A54-213 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include end_item_identification: KC-46A AIRCRAFT A, reference_number_differentiating_characteristics: ITEM IS FAA CERTIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-027-8788, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16606A54-213
NSN: 5331-01-027-8788
FSC: 5331 — O-RING
CAGE: 73760 — ITT AEROSPACE CONTROLS LLC DBA ITT AEROSPACE CONTROLS UNIT S (USA)
SPECIFICATIONS
end_item_identificationKC-46A AIRCRAFT A
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN5331-01-027-8788
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16606A54-213 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.329 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.479 INCHES MINIMUM AND 2.499 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.329 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.479 INCHES MINIMUM AND 2.499 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROSILICONE CLASS FQ
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
AS568-037Interchangeable
interchangeable cross-reference
interchangeable
ARP568-037Interchangeable
interchangeable cross-reference
interchangeable
H53-31-1067Interchangeable
interchangeable cross-reference
interchangeable
2-037Interchangeable
interchangeable cross-reference
interchangeable
GA1149Interchangeable
interchangeable cross-reference
interchangeable
STD3019C46Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16606A54-213?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16606A54-213?
16606A54-213 is a O-RING.
What parts can replace 16606A54-213?
There are 11 known substitutes for 16606A54-213: AS568-037, ARP568-037, H53-31-1067 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16606A54-213?
16606A54-213 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-027-8788. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16606A54-213

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026