PartsTable
Technical Data Sheet
Download PDF

16606A01-102 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

16606A01-102: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 1.379 INCHES NOMINAL IN, center_hole_diameter: 1.233 INCHES MINIMUM AND 1.245 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-663-7948, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16606A01-102
NSN: 5331-00-663-7948
FSC: 5331 — O-ring
CAGE: 73760 — ITT AEROSPACE CONTROLS LLC DBA ITT AEROSPACE CONTROLS UNIT S (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter1.379 INCHES NOMINAL IN
center_hole_diameter1.233 INCHES MINIMUM AND 1.245 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.062 INCHES NOMINAL IN
NSN5331-00-663-7948
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16606A01-102 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.379 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
CENTER HOLE DIAMETER: 1.233 INCHES MINIMUM AND 1.245 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
OUTSIDE DIAMETER1.379 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
CENTER HOLE DIAMETER1.233 INCHES MINIMUM AND 1.245 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 16606A01-102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16606A01-102?
16606A01-102 is a O-RING.
What is the NSN for 16606A01-102?
16606A01-102 is cataloged in the U.S. Government catalog under NSN 5331-00-663-7948. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16606A01-102