PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16601001-001
16601001-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-263-4375, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16601001-001
NSN: 5340-01-263-4375
FSC: 5340
CAGE: 24384 — SYPRIS ELECTRONICS, LLC DBA SYPRIS ELECTRONICS LLC (USA)
SPECIFICATIONS
diameter0.167 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
loop_inside_diameter0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
material_document_and_classificationL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.430 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
NSN5340-01-263-4375
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16601001-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.430 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
LOOP INSIDE DIAMETER: 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END0.430 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
MATERIAL THICKNESS0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSINGLE LOOP
LOOP INSIDE DIAMETER0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
OVERALL WIDTH0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
DIAMETER0.167 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
77-1Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16601001-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16601001-001?
16601001-001 is a CLAMP,LOOP.
What parts can replace 16601001-001?
There is 1 known substitute for 16601001-001: 77-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 16601001-001?
16601001-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-263-4375. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16601001-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026