The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 3.625 INCHES NOMINAL IN, first_hole_diameter: 0.312 INCHES NOMINAL IN, pin_overall_diameter: 0.8730 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN, second_hole_diameter: 0.188 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-164-1022, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| first_end_style | CHAMFERED |
| pin_overall_length | 3.625 INCHES NOMINAL IN |
| first_hole_diameter | 0.312 INCHES NOMINAL IN |
| pin_overall_diameter | 0.8730 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN |
| second_hole_diameter | 0.188 INCHES NOMINAL IN |
| first_end_taper_angle | 45.0 DEGREES NOMINAL |
| first_end_taper_length | 0.062 INCHES NOMINAL IN |
| hole_arrangement_style | BOTH END DRILLED |
| second_end_relationship_with_first_end | IDENTICAL |
| center_to_center_distance_between_holes | 1.438 INCHES NOMINAL IN |
| distance_from_centerline_of_hole_to_end_of_pin | 0.375 INCHES NOMINAL IN |
| NSN | 5315-00-164-1022 |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL IN |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.375 INCHES NOMINAL IN |
| PIN OVERALL DIAMETER | 0.8730 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL | STEEL OVERALL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.438 INCHES NOMINAL IN |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.312 INCHES NOMINAL IN |