PartsTable / COMPONENT / 1654G
1654G
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include length: 1.500 FEET NOMINAL FT, end_type: SINGLE ARMED, material: STEEL CORROSION RESISTING NEEDLE, sterility: STERILE, size_designator: 4-0, unit_of_issue_cube: 0.001 CUBIC FEET. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-5953, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1654G
NSN: 5330-00-285-5953 FSC: 5330 CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
length 1.500 FEET NOMINAL FT end_type SINGLE ARMED material STEEL CORROSION RESISTING NEEDLE sterility STERILE size_designator 4-0 unit_of_issue_cube 0.001 CUBIC FEET unit_package_quantity 12 immediate_container_type PACKET, FOIL, SEALED strand_fiber_arrangement MONOFILAMENT armed_suture_needle_style 3/8 CIRCLE immediate_container_quantity 12 armed_suture_needle_point_style REVERSE CUTTING EDGE NSN 5330-00-285-5953
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 1654G
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
• HOUSING BORE DIAMETER: 4.499 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN HOUSING BORE DIAMETER 4.499 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT DIAMETER 3.000 INCHES NOMINAL IN MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT CASE STYLE SQUARE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
4493 Interchangeable interchangeable cross-reference
interchangeable
15M105 Interchangeable interchangeable cross-reference
interchangeable
55088 Interchangeable interchangeable cross-reference
interchangeable
DS-922065 Interchangeable interchangeable cross-reference
interchangeable
472951 Interchangeable interchangeable cross-reference
interchangeable
350-3 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 1654G?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1654G?
1654G is a SEAL,PLAIN ENCASED.
What parts can replace 1654G?
There are 20 known substitutes for 1654G: 4493, 15M105, 55088 and 17 more. Substitute compatibility should be verified for your specific system.
Is 1654G still available?
1654G is currently cancelled.