165112-1 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

165112-1: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, loop_width: 0.250 INCHES NOMINAL IN, loop_length: 0.438 INCHES NOMINAL IN, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, style_designator: MULTIPLE LOOP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-280-6159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

165112-1

NSN: 5340-01-280-6159
FSC: 5340 — Hardware, Commercial
CAGE: 55820 — RTX CORPORATION DIV PRATT & WHITNEY (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 321 BAND
loop_width	0.250 INCHES NOMINAL IN
loop_length	0.438 INCHES NOMINAL IN
overall_width	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designator	MULTIPLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.026 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.769 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.551 INCHES NOMINAL IN
NSN	5340-01-280-6159

COMPONENT DIAGRAM

KEY FEATURES

•

LOOP WIDTH: 0.250 INCHES NOMINAL IN

•

STYLE DESIGNATOR: MULTIPLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.026 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.769 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

LOOP WIDTH	0.250 INCHES NOMINAL IN
STYLE DESIGNATOR	MULTIPLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.026 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.769 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.551 INCHES NOMINAL IN
MATERIAL	STEEL COMP 321 BAND

SUBSTITUTES & CROSS-REFERENCES 2

SAE-AS9391Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS9391-01Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 165112-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 165112-1?

165112-1 is a CLAMP,LOOP.

What parts can replace 165112-1?

There are 2 known substitutes for 165112-1: SAE-AS9391, MS9391-01. Substitute compatibility should be verified for your specific system.

What is the NSN for 165112-1?

165112-1 is cataloged in the U.S. Government catalog under NSN 5340-01-280-6159. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

165112-1 — CLAMP,LOOP

Request a Quote — 165112-1