The Servocylinder, cataloged under National Stock Number 1650-01-014-9332, is classified within Federal Supply Class 1650 (Aircraft Hydraulic, Vacuum, and De-icing System Components) of the Aircraft Components and Accessories group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 1650-01-014-9332 |
| Item Name | Servocylinder |
| FSC / FSG | 1650 / 16 — Aircraft Hydraulic, Vacuum, and De-icing System Components |
| Status | ACTIVE |
| Mounting Facility Diameter | 0.500 INCHES NOMINAL IN |
| FSC Application Data | HELICOPTER MODEL OH-58 HYDRAULIC SYSTEM |
| Pressure Rating | 1500.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS |
| Compressed Length | 5.310 INCHES NOMINAL IN |
| Temp Rating | -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF |
| Seat Angle in Deg | UNABLE TO DECODE |
| Extended Length | 10.272 INCHES MINIMUM AND 10.348 INCHES MAXIMUM IN |
| Design Characteristics | DOUBLE ACTING SINGLE CYLINDER |
| Port Thread Series Designator | UNABLE TO DECODE |
| Body Outside Diameter | 1.375 INCHES NOMINAL IN |
| Mounting Facility Length | 0.595 INCHES NOMINAL IN |
| First Piston Rod End Style | UNABLE TO DECODE |
| Material Document and Classification | QQ-A-200/3, ALLOY 2024, T8511 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6, ALLOY 2024, T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/3, T3511 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| First End Thickness at Mounting Holes | UNABLE TO DECODE |
| Port Thread Class | UNABLE TO DECODE |
| Port Thread Quantity Per Inch | UNABLE TO DECODE |
| Body Material | ALUMINUM ALLOY 2024 |
| Port Thread Diameter | UNABLE TO DECODE |
| Port Location and Quantity | 2 CENTER SECTION |
| Port Style | UNABLE TO DECODE |
| First End Hole Diameter | UNABLE TO DECODE |
| Test Data Document | 97499-206-076-031 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Integral Valve Operation Method | HYDRAULIC |
| Bore Diameter | 1.117 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY 2024 BODY |
| Mounting Type and Location | TRUNNION CENTER SECTION |
| Mounting Provision | PIN |
| First End Outside Diameter | UNABLE TO DECODE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | F |
| Reference | Meaning |
|---|---|
| 41103730-005 | 3/2 Design control — primary reference U.S. Government activity |
| 206-076-031-15 | 7/2 Vendor item drawing reference U.S. Government activity |
NSN 1650-01-014-9332 is a Servocylinder, classified under FSC 1650, Aircraft Hydraulic, Vacuum, and De-icing System Components. Status: active.
Key specifications for 1650-01-014-9332: Mounting Facility Diameter: 0.500 INCHES NOMINAL IN; FSC Application Data: HELICOPTER MODEL OH-58 HYDRAULIC SYSTEM; Pressure Rating: 1500.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS; Compressed Length: 5.310 INCHES NOMINAL IN. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.