The Motor,hydraulic, cataloged under National Stock Number 1650-00-194-3404, is classified within Federal Supply Class 1650 (No Item Name Available) of the Aircraft Components and Accessories group. The primary manufacturer of record is Parker Hannifin Corporation Div Hydraulic Systems Division. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 8 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 1650-00-194-3404 |
| Primary Part Number | 58188 |
| Item Name | Motor,hydraulic |
| FSC / FSG | 1650 / 16 — No Item Name Available |
| Manufacturer | Parker Hannifin Corporation Div Hydraulic Systems Division |
| Status | CANCELLED |
| Mounting Hole Diameter | 0.281 INCHES NOMINAL IN |
| Spline Pressure Angle in Deg | 30.0 |
| Spline Pitch | 20/60 |
| Pitch Diameter | 6.000 INCHES NOMINAL IN |
| Torque Load Rating | 19.0 INCH-POUNDS IN |
| Torque Load Rating | 19.0 INCH-POUNDS IN |
| Spline Major Diameter | 0.650 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN |
| Connection Quantity | 2 |
| Displacement Type | CONSTANT |
| Constant Displacement Per Revolution | 0.053 CUBIC INCHES |
| Material | ALUMINUM ALLOY HOUSING |
| Operating Speed at Rated Capacity in RPM | 10000.0 |
| Screw Thread Series Designator | UNF |
| Spline Major Diameter | 0.650 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN |
| Mounting Government Standard | AND 10260 |
| Spline Quantity | 12 |
| Material | ALUMINUM ALLOY HOUSING |
| Constant Displacement Per Revolution | 0.053 CUBIC INCHES |
| Screw Thread Series Designator | UNF |
| Mounting Government Standard | AND 10260 |
| Shaft Rotation Direction | CLOCKWISE |
| Displacement Type | CONSTANT |
| Connection Design | THREADED |
| Spline Pitch | 20/60 |
| Connection Type | INLET |
| Connection Quantity | 2 |
| Spline Length | 0.812 INCHES NOMINAL IN |
| Spline Pressure Angle in Deg | 30.0 |
| Thread Location | INTERNAL |
| Maximum Working Pressure Rating at Specified Temp Range | 2600 PSI MA WP,NO TEMPERATURE SPECIFIED |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 58188 PRIMARY | Parker Hannifin Corporation Div Hydraulic Systems Division (USA) |
| BL7360 | Breeze-Eastern Llc (USA) |
| BL3805-1 | Breeze-Eastern Llc (USA) |
| 53F00501-2 | Eaton Aerospace, Llc Dba Jackson South (USA) |
| BL3805 | Breeze-Eastern Llc (USA) |
| 53F00501 | General Signal Corp (USA) |
| 53F00501-1 | Eaton Aerospace, Llc Dba Jackson South (USA) |
| 53F00501 | Eaton Aerospace, Llc Dba Jackson South (USA) |
NSN 1650-00-194-3404 is a Motor,hydraulic, manufactured by Parker Hannifin Corporation Div Hydraulic Systems Division, classified under FSC 1650 (No Item Name Available). Status: cancelled.
NSN 1650-00-194-3404 has 8 cross-referenced part numbers: 58188 (Parker Hannifin Corporation Div Hydraulic Systems Division), BL7360 (Breeze-Eastern Llc), BL3805-1 (Breeze-Eastern Llc), 53F00501-2 (Eaton Aerospace, Llc Dba Jackson South), BL3805 (Breeze-Eastern Llc) and 3 more.
There are 2 known substitutes for 1650-00-194-3404: 5930-00-107-7135, 5330-01-020-9728. Verify interchangeability with system specifications before substitution.
Key specifications for 58188: Mounting Hole Diameter: 0.281 INCHES NOMINAL IN; Spline Pressure Angle in Deg: 30.0; Spline Pitch: 20/60; Pitch Diameter: 6.000 INCHES NOMINAL IN. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 1650-00-194-3404 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.