The Servocylinder, cataloged under National Stock Number 1650-00-143-8315, is classified within Federal Supply Class 1650 (No Item Name Available) of the Aircraft Components and Accessories group. The primary manufacturer of record is Parker Hannifin Corporation Div Aerospace Group Headquarters. Government technical data includes 28 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 1650-00-143-8315 |
| Primary Part Number | SGT220-11 |
| Item Name | Servocylinder |
| FSC / FSG | 1650 / 16 — No Item Name Available |
| Manufacturer | Parker Hannifin Corporation Div Aerospace Group Headquarters |
| Status | ACTIVE |
| Design Characteristics | DOUBLE ACTING SINGLE CYLINDER |
| First End Largest Inside Diameter | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Port Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Mounting Facility Diameter | 0.4986 INCHES MINIMUM IN |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY PART NO. 204-076-053-11,FSMC 97499 |
| Mounting Type and Location | TRUNNION CENTER SECTION |
| First End Fork Width | 0.700 INCHES NOMINAL IN |
| Port Thread Quantity Per Inch | 20 |
| Bore Diameter | 0.625 INCHES NOMINAL IN |
| Body Outside Diameter | 1.390 INCHES MINIMUM AND 1.410 INCHES MAXIMUM IN |
| Mounting Facility Diameter | 0.4991 INCHES MAXIMUM IN |
| First End Hole Diameter | 0.3437 INCHES NOMINAL IN |
| Seat Angle in Deg | 120.0 |
| Mounting Facility Length | 0.500 INCHES NOMINAL IN |
| Mounting Provision | PIN |
| Temp Rating | -65.0 CELSIUS DEGC |
| Second End Outside Diameter | 0.593 INCHES NOMINAL IN |
| First End Fork Depth | 1.600 INCHES NOMINAL IN |
| Port Thread Class | 3B |
| Temp Rating | 180.0 CELSIUS DEGC |
| Bore Diameter | 0.885 INCHES NOMINAL IN |
| Bore Diameter | 0.957 INCHES NOMINAL IN |
| First End Fork Span Width | 0.751 INCHES NOMINAL IN |
| Bore Diameter | 1.000 INCHES NOMINAL IN |
| Bore Diameter | 1.066 INCHES NOMINAL IN |
| Bore Diameter | 0.938 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 2024 BODY |
| Port Style | GASKET SEAL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| SGT220-11 | Parker Hannifin Corporation Div Aerospace Group Headquarters (USA) |
| 204-076-053-11 | Bell Textron Inc (USA) |
NSN 1650-00-143-8315 is a Servocylinder, manufactured by Parker Hannifin Corporation Div Aerospace Group Headquarters, classified under FSC 1650 (No Item Name Available). Status: active.
NSN 1650-00-143-8315 has 2 cross-referenced part numbers: SGT220-11 (Parker Hannifin Corporation Div Aerospace Group Headquarters), 204-076-053-11 (Bell Textron Inc).
There are 2 known substitutes for 1650-00-143-8315: 1650-00-014-2038, 1650-00-944-8169. Verify interchangeability with system specifications before substitution.
Key specifications for SGT220-11: Design Characteristics: DOUBLE ACTING SINGLE CYLINDER; First End Largest Inside Diameter: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Port Thread Series Designator: UNIFIED NATIONAL JOINT FINE (UNJF); Mounting Facility Diameter: 0.4986 INCHES MINIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.