165-1007-4-25T — 165-1007-4-25T

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

165-1007-4-25T: 165-1007-4-25T.

The 165-1007-4-25T is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, body_style: SPRING FINGERED, overall_width: 0.322 INCHES NOMINAL IN, overall_height: 0.125 INCHES NOMINAL IN, overall_length: 4.230 INCHES MINIMUM AND 4.270 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND TIN. This part is cataloged in the U.S.

Government catalog under NSN 5998-01-360-1467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 165-1007-4-25T

NSN: 5998-01-360-1467
FSC: 5998 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
CAGE: 52094 — CALMARK CORPORATION (USA)

SPECIFICATIONS

material	COPPER ALLOY
body_style	SPRING FINGERED
overall_width	0.322 INCHES NOMINAL IN
overall_height	0.125 INCHES NOMINAL IN
overall_length	4.230 INCHES MINIMUM AND 4.270 INCHES MAXIMUM IN
surface_treatment	CADMIUM AND TIN
unthreaded_mounting_hole_diameter	0.094 INCHES MINIMUM AND 0.098 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
mounting_facility_type_and_quantity	3 FLANGE SINGLE MOUNTING FACILITY
surface_treatment_document_and_classification	QQ-P-416,TYPE II,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-T-10727,TYPE I MIL SPEC 2ND TREATMENT RESPONSE
NSN	5998-01-360-1467

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY TYPE AND QUANTITY: 3 FLANGE SINGLE MOUNTING FACILITY

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-T-10727,TYPE I MIL SPEC 2ND TREATMENT RESPONSE

•

BODY STYLE: SPRING FINGERED

•

UNTHREADED MOUNTING HOLE DIAMETER: 0.094 INCHES MINIMUM AND 0.098 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN

•

SURFACE TREATMENT: CADMIUM AND TIN

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY TYPE AND QUANTITY	3 FLANGE SINGLE MOUNTING FACILITY
OVERALL HEIGHT	0.125 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE II,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-T-10727,TYPE I MIL SPEC 2ND TREATMENT RESPONSE
BODY STYLE	SPRING FINGERED
UNTHREADED MOUNTING HOLE DIAMETER	0.094 INCHES MINIMUM AND 0.098 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
OVERALL LENGTH	4.230 INCHES MINIMUM AND 4.270 INCHES MAXIMUM IN
OVERALL WIDTH	0.322 INCHES NOMINAL IN
SURFACE TREATMENT	CADMIUM AND TIN
MATERIAL	COPPER ALLOY

OTHER ITEMS IN FSC 5998 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5998-00-000-0087 5998-00-000-0089 5998-00-000-0154 5998-00-000-0173 5998-00-000-0175 5998-00-000-0177 5998-00-001-1267 5998-00-001-1271

SUBSTITUTES & CROSS-REFERENCES 1

PAS 165-1007-4.25Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 165-1007-4-25T?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 165-1007-4-25T?

165-1007-4-25T is a 165-1007-4-25T. It is classified as a MRO (MRO_GENERAL).

What parts can replace 165-1007-4-25T?

There is 1 known substitute for 165-1007-4-25T: PAS 165-1007-4.25. Substitute compatibility should be verified for your specific system.

What is the NSN for 165-1007-4-25T?

165-1007-4-25T is cataloged in the U.S. Government catalog under NSN 5998-01-360-1467. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

165-1007-4-25T — 165-1007-4-25T

Request a Quote — 165-1007-4-25T