164502-01: SPACER,PLATE.
The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE AMIDE OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR PLASTIC POLYCAPROLACTAM, hole_diameter: 0.030 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN, overall_width: 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, overall_length: 0.450 INCHES NOMINAL IN, style_designator: NON-CIRCULAR W/CORNER RADIUS, outside_corner_radius: 0.050 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5365-01-090-8920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | PLASTIC POLYHEXAMETHYLENE AMIDE OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR PLASTIC POLYCAPROLACTAM |
| hole_diameter | 0.030 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN |
| overall_width | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN |
| overall_length | 0.450 INCHES NOMINAL IN |
| special_features | ALL HOLES COUNTERBORED 0.065 IN. DIA BY 0.0275 IN. DEEP AND 4 PROJECTIONS 0.030 IN. DIA BY 0.030 IN. H LOCATED 0.050 IN. FROM CENTER OF BOLT HOLES OUTSIDE EDGE ALONG THE LG IN |
| style_designator | NON-CIRCULAR W/CORNER RADIUS |
| bolt_hole_quantity | 2 |
| outside_corner_radius | 0.050 INCHES NOMINAL IN |
| material_document_and_classification | MIL-M-20693 MIL SPEC ALL MATERIAL RESPONSES |
| bolt_hole_centerline_to_nearest_edge_distance | 0.050 INCHES NOMINAL IN |
| outside_edge_to_bolt_hole_center_distance_along_length | 0.050 INCHES NOMINAL IN |
| center_to_center_distance_between_bolt_holes_along_length | 0.350 INCHES NOMINAL IN |
| NSN | 5365-01-090-8920 |
| STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-20693 MIL SPEC ALL MATERIAL RESPONSES |
| OVERALL LENGTH | 0.450 INCHES NOMINAL IN |
| OVERALL WIDTH | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN |
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.050 INCHES NOMINAL IN |
| BOLT HOLE QUANTITY | 2 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.350 INCHES NOMINAL IN |
| SPECIAL FEATURES | ALL HOLES COUNTERBORED 0.065 IN. DIA BY 0.0275 IN. DEEP AND 4 PROJECTIONS 0.030 IN. DIA BY 0.030 IN. H LOCATED 0.050 IN. FROM CENTER OF BOLT HOLES OUTSIDE EDGE ALONG THE LG IN |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.050 INCHES NOMINAL IN |
| OUTSIDE CORNER RADIUS | 0.050 INCHES NOMINAL IN |
No substitute or cross-reference records for this part.