PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16417
16417 ✓ Verified by PartsTable
Clementoni · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CONNECTING ROD,PISTON is a Clementoni industrial component. Key specifications include shape: DISK, material: STEEL CORROSION RESISTING OVERALL, type_size: 12 PITCH, hole_diameter: 0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN, character_type: UPPER CASE AND LOWER CASE, overall_length: 38.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-3134, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16417
NSN: 5310-00-058-3134
FSC: 5310
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
shapeDISK
materialSTEEL CORROSION RESISTING OVERALL
type_size12 PITCH
hole_diameter0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
character_typeUPPER CASE AND LOWER CASE
overall_length38.0 MILLIMETERS NOMINAL MM
hardness_rating35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter1.079 INCHES MAXIMUM IN
special_features5.0 MM LOCKING SCREW; SELF-TAPPING; T25 STARDRIVE RECESS; LENGTH: 38 MM; END ITEM: SCREW SET, BONE, NSN 6515-01-584-1870 MM
style_designatorBALL
type_face_designPRESTIGE ELITE
surface_treatmentPASSIVATE OVERALL
NSN5310-00-058-3134
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 16417 · Clementoni ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 2 STYLE AND C CLASS
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.079 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
MATERIAL THICKNESS: 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
HOLE DIAMETER: 0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA2 STYLE AND C CLASS
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.079 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
MATERIAL THICKNESS0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
HOLE DIAMETER0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
2080Interchangeable
interchangeable cross-reference
interchangeable
16417Interchangeable
interchangeable cross-reference
interchangeable
98228Interchangeable
interchangeable cross-reference
interchangeable
500790Interchangeable
interchangeable cross-reference
interchangeable
868572Interchangeable
interchangeable cross-reference
interchangeable
1613801Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16417?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16417?
16417 is a CONNECTING ROD,PISTON manufactured by Clementoni.
What parts can replace 16417?
There are 18 known substitutes for 16417: 2080, 16417, 98228 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16417?
16417 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-3134. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16417

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026