PartsTable
Technical Data Sheet
16408 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>Key features:</b><br>- Up to 80 GB capacity with hardware data compression on a single cartridge.<br>- Up to 6 MB/sec. data transfer rate.<br>- 80 GB backup in less than 4 hours.<br>- Compact 5,25 inch half height form factor.<br>- Read compatible with DLT1 and DLT4000.<br>- Uses standard DLTtape IV media.<br>- Internal and external solution.<br>- TapeAlertTM monitors drive and cartridge to warn in case of problems.<br>- 200.000 hrs MTBF at a 100% duty cycle.<br>- Support of nearly all operating Systems and platforms. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-078-2533, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
16408
NSN: 5330-00-078-2533
FSC: 5330
CAGE: 28953 — RIX INDUSTRIES (USA)
SPECIFICATIONS
materialSTEEL BODY
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
head_styleFILLISTER
scale_typeECCENTRIC
body_length4.250 INCHES MAXIMUM IN
head_height0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
constructionONE-PIECE
scale_length2.625 INCHES NOMINAL IN
thread_class2A A
head_diameter0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
hole_diameter0.164 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
thread_length0.714 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
NSN5330-00-078-2533
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16408 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
150300-0250Interchangeable
interchangeable cross-reference
interchangeable
150300-0205Interchangeable
interchangeable cross-reference
interchangeable
16408Interchangeable
interchangeable cross-reference
interchangeable
K238Interchangeable
interchangeable cross-reference
interchangeable
K-295Interchangeable
interchangeable cross-reference
interchangeable
1269786Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16408?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16408?
16408 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Clementoni.
What parts can replace 16408?
There are 16 known substitutes for 16408: 150300-0250, 150300-0205, 16408 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16408?
16408 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-078-2533. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16408