The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: STEEL, thickness: 0.047 INCHES NOMINAL IN, overall_length: 0.532 INCHES NOMINAL IN, mounting_method: TERMINAL, terminal_length: 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, overall_diameter: 0.056 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-022-5664, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL |
| thickness | 0.047 INCHES NOMINAL IN |
| overall_length | 0.532 INCHES NOMINAL IN |
| mounting_method | TERMINAL |
| terminal_length | 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| overall_diameter | 0.056 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN |
| thread_direction | RIGHT-HAND |
| surface_treatment | NICKEL |
| width_across_flats | 0.500 INCHES NOMINAL IN |
| nominal_thread_size | 0.312 INCHES IN |
| screw_thread_length | 0.485 INCHES NOMINAL IN |
| hole_inside_diameter | 0.200 INCHES NOMINAL IN |
| NSN | 5961-00-022-5664 |
| CURRENT RATING PER CHARACTERISTIC | 1.00 AMPERES MAXIMUM PEAK FORWARD SURGE CURRENT AND 75.00 MILLIAMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 100.0 MAXIMUM BREAKDOWN VOLTAGE, DC AND 75.0 MAXIMUM WORKING PEAK REVERSE VOLTAGE |
| OVERALL DIAMETER | 0.056 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN |
| OVERALL LENGTH | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN |
| MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 175.0 CELSIUS AMBIENT AIR DEGC |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| MOUNTING METHOD | TERMINAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-PRF-19500/116 GOVERNMENT SPECIFICATION |
| TEST DATA DOCUMENT | 81349-MIL-PRF-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |