PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1632P
1632P ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include color: BLACK, overall_width: 32.0 INCHES NOMINAL IN, overall_length: 17.0 INCHES NOMINAL IN, special_features: MATERIAL-POLYETHYLENE, part_name_assigned_by_controlling_agency: BALLISTIC SHIELD,NATO SERIES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-146-4761, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1632P
NSN: 5330-00-146-4761
FSC: 5330
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)
SPECIFICATIONS
colorBLACK
overall_width32.0 INCHES NOMINAL IN
overall_length17.0 INCHES NOMINAL IN
special_featuresMATERIAL-POLYETHYLENE
part_name_assigned_by_controlling_agencyBALLISTIC SHIELD,NATO SERIES
NSN5330-00-146-4761
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1632P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.656 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.562 INCHES NOMINAL IN
•
FLANGED BODY OUTSIDE DIAMETER: 1.109 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.375 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.656 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.562 INCHES NOMINAL IN
FLANGED BODY OUTSIDE DIAMETER1.109 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.375 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
D-26Interchangeable
interchangeable cross-reference
interchangeable
4820PL1257469Interchangeable
interchangeable cross-reference
interchangeable
C7548Interchangeable
interchangeable cross-reference
interchangeable
7317Interchangeable
interchangeable cross-reference
interchangeable
C31510Interchangeable
interchangeable cross-reference
interchangeable
1632PInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1632P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1632P?
1632P is a RETAINER,PACKING.
What parts can replace 1632P?
There are 8 known substitutes for 1632P: D-26, 4820PL1257469, C7548 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1632P?
1632P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-146-4761. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1632P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026