PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16302ADX
16302ADX ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN, thread_length: 0.158 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384, fastener_length: 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-134-8720, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16302ADX
NSN: 5305-01-134-8720
FSC: 5305
CAGE: 1VN02 — AIRDALE EXPRESS LLC DIV AIRDALE EXPRESS (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
thread_length0.158 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384
fastener_length0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-01-134-8720
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 16302ADX · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384
•
FASTENER LENGTH: 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384
FASTENER LENGTH0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HEAD DIAMETER0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD QUANTITY PER INCH32
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLESLOT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
16302Interchangeable
interchangeable cross-reference
interchangeable
R16302Interchangeable
interchangeable cross-reference
interchangeable
3035FInterchangeable
interchangeable cross-reference
interchangeable
428707Interchangeable
interchangeable cross-reference
interchangeable
28046Interchangeable
interchangeable cross-reference
interchangeable
S40891-05Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16302ADX?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16302ADX?
16302ADX is a SCREW,MACHINE.
What parts can replace 16302ADX?
There are 15 known substitutes for 16302ADX: 16302, R16302, 3035F and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16302ADX?
16302ADX is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-134-8720. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16302ADX

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026