PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16300-00
16300-00 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.3759 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM IN, material: STEEL COMP 4130H OVERALL, overall_length: 0.875 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER, undercut_width: 0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN, first_end_style: CHAMFERED W/THRU HOLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-923-5399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16300-00
NSN: 5315-00-923-5399
FSC: 5315
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
diameter0.3759 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM IN
materialSTEEL COMP 4130H OVERALL
overall_length0.875 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES OUTSIDE DIAMETER
undercut_width0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
first_end_styleCHAMFERED W/THRU HOLE
hardness_rating30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
effective_length0.688 INCHES NOMINAL IN
special_featuresTHRU HOLE THD ON GROOVED END 8-32 UNC 2B 0.345 IN. MIN 0.405 IN. MAX LG,WITH RETAINING RING IN
style_designatorGROOVE
surface_treatmentPHOSPHATE OVERALL
undercut_diameter0.284 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
NSN5315-00-923-5399
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 16300-00 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT DIAMETER: 0.284 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 4130H OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE FINISH: 32.0 MICROINCHES OUTSIDE DIAMETER
•
STYLE DESIGNATOR: GROOVE
•
FIRST END LOCATION: BOTH ENDS
TECHNICAL CHARACTERISTICS (FLIS)
UNDERCUT DIAMETER0.284 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4130H OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER
STYLE DESIGNATORGROOVE
SPECIAL FEATURESTHRU HOLE THD ON GROOVED END 8-32 UNC 2B 0.345 IN. MIN 0.405 IN. MAX LG,WITH RETAINING RING IN
FIRST END LOCATIONBOTH ENDS
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
SURFACE TREATMENTPHOSPHATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2122700-72Interchangeable
interchangeable cross-reference
interchangeable
2122702-72Interchangeable
interchangeable cross-reference
interchangeable
2122704-4Interchangeable
interchangeable cross-reference
interchangeable
5365PL0893238Interchangeable
interchangeable cross-reference
interchangeable
16300Interchangeable
interchangeable cross-reference
interchangeable
HACH 44600-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16300-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16300-00?
16300-00 is a PIN,GROOVED,HEADLESS.
What parts can replace 16300-00?
There are 12 known substitutes for 16300-00: 2122700-72, 2122702-72, 2122704-4 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16300-00?
16300-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-923-5399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16300-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026