PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 162E17
162E17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 84.0 DEGREES NOMINAL, peripheral_diameter: 3.562 INCHES NOMINAL IN, center_hole_diameter: 2.005 INCHES MINIMUM AND 2.007 INCHES MAXIMUM IN, cross-sectional_height: 0.938 INCHES NOMINAL IN, cross-sectional_shape_style: FLANGE, flanged_body_outside_diameter: 2.618 INCHES MINIMUM AND 2.620 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-740-9050, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
162E17
NSN: 5330-00-740-9050
FSC: 5330
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
angle84.0 DEGREES NOMINAL
peripheral_diameter3.562 INCHES NOMINAL IN
center_hole_diameter2.005 INCHES MINIMUM AND 2.007 INCHES MAXIMUM IN
cross-sectional_height0.938 INCHES NOMINAL IN
cross-sectional_shape_styleFLANGE
flanged_body_outside_diameter2.618 INCHES MINIMUM AND 2.620 INCHES MAXIMUM IN
NSN5330-00-740-9050
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 162E17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 3.562 INCHES NOMINAL IN
•
ANGLE: 84.0 DEGREES NOMINAL
•
FLANGED BODY OUTSIDE DIAMETER: 2.618 INCHES MINIMUM AND 2.620 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.005 INCHES MINIMUM AND 2.007 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
CROSS-SECTIONAL HEIGHT: 0.938 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER3.562 INCHES NOMINAL IN
ANGLE84.0 DEGREES NOMINAL
FLANGED BODY OUTSIDE DIAMETER2.618 INCHES MINIMUM AND 2.620 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.005 INCHES MINIMUM AND 2.007 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
CROSS-SECTIONAL HEIGHT0.938 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
6145PL0839435Interchangeable
interchangeable cross-reference
interchangeable
6370-1Interchangeable
interchangeable cross-reference
interchangeable
6145PL1756691Interchangeable
interchangeable cross-reference
interchangeable
C54779Interchangeable
interchangeable cross-reference
interchangeable
11236Interchangeable
interchangeable cross-reference
interchangeable
14379Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 162E17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 162E17?
162E17 is a RETAINER,PACKING.
What parts can replace 162E17?
There are 8 known substitutes for 162E17: 6145PL0839435, 6370-1, 6145PL1756691 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 162E17?
162E17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-740-9050. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 162E17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026