PartsTable
Technical Data Sheet
162694 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, rim_surface_width: 0.062 INCHES NOMINAL IN, peripheral_diameter: 0.438 INCHES NOMINAL IN, center_hole_diameter: 0.215 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN, cross-sectional_height: 0.156 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-033-5115, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
162694
NSN: 5330-00-033-5115
FSC: 5330
CAGE: 25980 — GRACO INC. (USA)
SPECIFICATIONS
materialLEATHER OVERALL
rim_surface_width0.062 INCHES NOMINAL IN
peripheral_diameter0.438 INCHES NOMINAL IN
center_hole_diameter0.215 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
cross-sectional_height0.156 INCHES NOMINAL IN
cross-sectional_shape_styleV
NSN5330-00-033-5115
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 162694 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
RIM SURFACE WIDTH: 0.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE: V
CROSS-SECTIONAL HEIGHT: 0.156 INCHES NOMINAL IN
MATERIAL: LEATHER OVERALL
CENTER HOLE DIAMETER: 0.215 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
PERIPHERAL DIAMETER: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RIM SURFACE WIDTH0.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEV
CROSS-SECTIONAL HEIGHT0.156 INCHES NOMINAL IN
MATERIALLEATHER OVERALL
CENTER HOLE DIAMETER0.215 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
L1206Interchangeable
interchangeable cross-reference
interchangeable
206MInterchangeable
interchangeable cross-reference
interchangeable
B6935Interchangeable
interchangeable cross-reference
interchangeable
3179368PC5Interchangeable
interchangeable cross-reference
interchangeable
15179PC15Interchangeable
interchangeable cross-reference
interchangeable
15053PC5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 162694?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 162694?
162694 is a PACKING,PREFORMED.
What parts can replace 162694?
There are 9 known substitutes for 162694: L1206, 206M, B6935 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 162694?
162694 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-033-5115. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
Loading comments...
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 162694