PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1624-293
1624-293 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, outside_diameter: 7.469 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 7.000 INCHES NOMINAL IN, maximum_pressure_rating: 125.0 POUNDS PER SQUARE INCH (PSI) LBS, cross-sectional_thickness: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-903-8171, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1624-293
NSN: 5330-00-903-8171
FSC: 5330
CAGE: 50306 — FEDERAL EQUIPMENT AND MANUFACTURING CO., INC. DIV FEDERAL EQUIPMENT & MANUFACTURING CO., INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
outside_diameter7.469 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter7.000 INCHES NOMINAL IN
maximum_pressure_rating125.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.375 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-903-8171
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1624-293 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 7.469 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 7.000 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 125.0 POUNDS PER SQUARE INCH (PSI) LBS
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER7.469 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL THICKNESS0.375 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER7.000 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING125.0 POUNDS PER SQUARE INCH (PSI) LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
6206681Interchangeable
interchangeable cross-reference
interchangeable
201492Interchangeable
interchangeable cross-reference
interchangeable
10-1613Interchangeable
interchangeable cross-reference
interchangeable
3330263Interchangeable
interchangeable cross-reference
interchangeable
10-1613E27-8DInterchangeable
interchangeable cross-reference
interchangeable
10-1613F31-8BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1624-293?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1624-293?
1624-293 is a GASKET.
What parts can replace 1624-293?
There are 12 known substitutes for 1624-293: 6206681, 201492, 10-1613 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1624-293?
1624-293 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-903-8171. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1624-293

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026