PartsTable
Technical Data Sheet
Download PDF

162210 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

162210: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL HOLE/SLOT MOUNTED, body_length: 2.188 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 2.000 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 162210
NSN: 3110-00-100-0617
NIINs: 001000617, 011085139, 016148757
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL HOLE/SLOT MOUNTED
body_length2.188 INCHES NOMINAL IN
shaft_styleROUND
shaft_length2.000 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter6.000 INCHES NOMINAL IN
overall_width1.3750 INCHES NOMINAL IN
overall_length4.188 INCHES NOMINAL IN
shaft_diameter0.375 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
outside_diameter8.5000 INCHES NOMINAL IN
NSN3110-00-100-0617
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 162210 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 8.5000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH1.3750 INCHES NOMINAL IN
OUTSIDE DIAMETER8.5000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
1M6573Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2540P11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
103S48Reference document
Same NSN cross-reference
Reference document — Secondary reference
30128Reference document
Same NSN cross-reference
Reference document — Secondary reference
G588Reference document
Same NSN cross-reference
Reference document — Secondary reference
K74850Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 162210?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 162210?
162210 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 162210?
There are 9 known substitutes for 162210: 1M6573, 2540P11, 103S48 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 162210?
162210 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 162210