PartsTable
Technical Data Sheet
Download PDF

16175A32 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

16175A32: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 3.500 INCHES NOMINAL IN, pin_diameter: 0.267 INCHES NOMINAL IN, pin_removability: NONREMOVABLE, style_designator: BUTT, material_thickness: 0.123 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-621-2009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16175A32
NSN: 5340-01-621-2009
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width3.500 INCHES NOMINAL IN
pin_diameter0.267 INCHES NOMINAL IN
pin_removabilityNONREMOVABLE
style_designatorBUTT
material_thickness0.123 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
end_item_identificationNSN 2330-01-580-7654
pin_center_to_body_edge_distance1.670 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyUNFINISHED STEEL SURFACE HINGE W/NONREMOVABLE PIN
NSN5340-01-621-2009
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16175A32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.267 INCHES NOMINAL IN
•
REVERSIBLE FEATURE: NOT INCLUDED
•
BODY WIDTH: 3.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BUTT
•
PIN CENTER TO BODY EDGE DISTANCE: 1.670 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.123 INCHES NOMINAL IN
•
PIN REMOVABILITY: NONREMOVABLE
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.267 INCHES NOMINAL IN
REVERSIBLE FEATURENOT INCLUDED
BODY WIDTH3.500 INCHES NOMINAL IN
STYLE DESIGNATORBUTT
PIN CENTER TO BODY EDGE DISTANCE1.670 INCHES NOMINAL IN
MATERIAL THICKNESS0.123 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
PART NAME ASSIGNED BY CONTROLLING AGENCYUNFINISHED STEEL SURFACE HINGE W/NONREMOVABLE PIN
END ITEM IDENTIFICATIONNSN 2330-01-580-7654
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
BTS12333526Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 16175A32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16175A32?
16175A32 is a HINGE,BUTT.
What parts can replace 16175A32?
There is 1 known substitute for 16175A32: BTS12333526. Substitute compatibility should be verified for your specific system.
What is the NSN for 16175A32?
16175A32 is cataloged in the U.S. Government catalog under NSN 5340-01-621-2009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16175A32