16151EH: LEVER,REMOTE CONTROL.
The LEVER,REMOTE CONTROL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, bore_type: PLAIN STRAIGHT, bore_diameter: 0.4365 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN, special_features: SHAFT ANGLE 10 DEG 1.58 IN. FROM LINK END; HOLE THRU BOTH WALLS OF SHAFT HOLE END 0.0930 - 0.0955 IN.
DIA IN LINE IN, style_designator: OFFSET, ONE HOLE LINK END, surface_treatment: ANODIZE. This part is cataloged in the U.S. Government catalog under NSN 3040-01-219-9930, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY |
| bore_type | PLAIN STRAIGHT |
| bore_diameter | 0.4365 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN |
| special_features | SHAFT ANGLE 10 DEG 1.58 IN. FROM LINK END; HOLE THRU BOTH WALLS OF SHAFT HOLE END 0.0930 - 0.0955 IN. DIA IN LINE IN |
| style_designator | OFFSET, ONE HOLE LINK END |
| surface_treatment | ANODIZE |
| link_end_thickness | 0.169 INCHES NOMINAL IN |
| shaft_end_thickness | 0.166 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN |
| link_end_hole_diameter | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN |
| end_item_identification | VALVE ACTUATOR P/N 107796A121; B-1B ACFT FUEL SYSTEM |
| material_document_and_classification | QQ-A-250/4, T4 FED SPEC SINGLE MATERIAL RESPONSE |
| center_to_center_distance_between_link_and_shaft_holes | 2.310 INCHES MINIMUM AND 2.400 INCHES MAXIMUM IN |
| NSN | 3040-01-219-9930 |
| LINK END THICKNESS | 0.169 INCHES NOMINAL IN |
| LINK END HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN |
| SHAFT END THICKNESS | 0.166 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | OFFSET, ONE HOLE LINK END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4, T4 FED SPEC SINGLE MATERIAL RESPONSE |
| BORE TYPE | PLAIN STRAIGHT |
| CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 2.310 INCHES MINIMUM AND 2.400 INCHES MAXIMUM IN |
| SPECIAL FEATURES | SHAFT ANGLE 10 DEG 1.58 IN. FROM LINK END; HOLE THRU BOTH WALLS OF SHAFT HOLE END 0.0930 - 0.0955 IN. DIA IN LINE IN |
| SURFACE TREATMENT | ANODIZE |
| END ITEM IDENTIFICATION | VALVE ACTUATOR P/N 107796A121; B-1B ACFT FUEL SYSTEM |
No substitute or cross-reference records for this part.