PartsTable
Technical Data Sheet
PartsTable / MRO / 1612
1612 ✓ Verified by PartsTable
PanzerGlass · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

PanzerGlass has in several tests proven to be the strongest Protection Glass in the market. Additionally PanzerGlass is highly accessable, with support for more than a hundred different mobile devices. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-193-7571, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1612
NSN: 5310-00-193-7571
FSC: 5310
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
angle67.5 DEGREES
colorWHITE
shapeRECTANGULAR W/CORNER OPTIONAL
filterNOT INCLUDED
height0.891 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
tube_typePENTAGRID
base_styleDOUBLE CONTACT BAYONET PINLESS
body_depth41.0 MILLIMETERS NOMINAL MM
body_styleSTRAIGHT THRU
bulb_styleA (ARBITRARY DESIGNATION)
leg_length2.468 INCHES NOMINAL ALL ENDS IN
NSN5310-00-193-7571
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1612 · PanzerGlass ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OVERALL
•
OUTSIDE DIAMETER: 0.462 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.221 INCHES MINIMUM AND 0.231 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.024 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OVERALL
OUTSIDE DIAMETER0.462 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN
HOLE DIAMETER0.221 INCHES MINIMUM AND 0.231 INCHES MAXIMUM IN
MATERIAL THICKNESS0.024 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
STYLE DESIGNATORFLAT EXTERNAL TEETH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
1612C00 00EDBFInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1612?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1612?
1612 is a CAPACITOR,FIXED,PLASTIC DIELECTR manufactured by PanzerGlass. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1612?
There is 1 known substitute for 1612: 1612C00 00EDBF. Substitute compatibility should be verified for your specific system.
What is the NSN for 1612?
1612 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-193-7571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1612

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026