PartsTable
Technical Data Sheet
Download PDF

1611206-8 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1611206-8: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include angle: 10.0 DEGREES NOMINAL, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, peripheral_diameter: 1.172 INCHES MINIMUM AND 1.777 INCHES MAXIMUM IN, center_hole_diameter: 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, cross-sectional_height: 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN, cross-sectional_shape_style: CUP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-958-8360, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1611206-8
NSN: 5330-00-958-8360
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
angle10.0 DEGREES NOMINAL
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
peripheral_diameter1.172 INCHES MINIMUM AND 1.777 INCHES MAXIMUM IN
center_hole_diameter0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
cross-sectional_height0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
cross-sectional_shape_styleCUP
material_document_and_classificationL-P-402,TY 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-958-8360
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1611206-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-402,TY 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
ANGLE: 10.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 1.172 INCHES MINIMUM AND 1.777 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-402,TY 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLECUP
ANGLE10.0 DEGREES NOMINAL
PERIPHERAL DIAMETER1.172 INCHES MINIMUM AND 1.777 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
01205Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1611206-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1611206-8?
1611206-8 is a PACKING,PREFORMED.
What parts can replace 1611206-8?
There is 1 known substitute for 1611206-8: 01205. Substitute compatibility should be verified for your specific system.
What is the NSN for 1611206-8?
1611206-8 is cataloged in the U.S. Government catalog under NSN 5330-00-958-8360. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1611206-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.