PartsTable
Technical Data Sheet
Download PDF

1611203PC1 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

1611203PC1: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4037 OR STEEL COMP 4042 OR STEEL COMP 8740 OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.168 INCHES NOMINAL IN, thread_length: 0.375 INCHES MAXIMUM IN, fastener_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-034-1242, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1611203PC1
NSN: 5305-00-034-1242
FSC: 5305 — Screws
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 4037 OR STEEL COMP 4042 OR STEEL COMP 8740 OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.168 INCHES NOMINAL IN
thread_length0.375 INCHES MAXIMUM IN
fastener_length0.375 INCHES NOMINAL IN
locking_featurePELLET THREADS
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
surface_treatmentZINC OVERALL
width_across_flats0.071 INCHES NOMINAL IN
internal_drive_styleHEXAGON
NSN5305-00-034-1242
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1611203PC1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.071 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
THREAD LENGTH: 0.375 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: PELLET THREADS
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.071 INCHES NOMINAL IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
THREAD LENGTH0.375 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPELLET THREADS
SURFACE TREATMENTZINC OVERALL
INTERNAL DRIVE STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 1
5274Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1611203PC1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1611203PC1?
1611203PC1 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 1611203PC1?
There is 1 known substitute for 1611203PC1: 5274. Substitute compatibility should be verified for your specific system.
What is the NSN for 1611203PC1?
1611203PC1 is cataloged in the U.S. Government catalog under NSN 5305-00-034-1242. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1611203PC1