PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1611200PC89
1611200PC89 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,INTERNAL WRENCHING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_height: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, thread_length: 1.500 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN, surface_finish: 32.0 MICROINCHES THREADS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-034-1149, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1611200PC89
NSN: 5306-00-034-1149
FSC: 5306
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_height0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
thread_length1.500 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES THREADS
fastener_length2.000 INCHES NOMINAL IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats0.312 INCHES NOMINAL IN
internal_drive_styleHEXAGON
NSN5306-00-034-1149
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1611200PC89 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH LBS
•
HEAD HEIGHT: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 16
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
SURFACE FINISH32.0 MICROINCHES THREADS
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM YIELD STRENGTH150000 POUNDS PER SQUARE INCH LBS
HEAD HEIGHT0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH16
SURFACE TREATMENTZINC OVERALL
THREAD LENGTH1.500 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
090-45099C8-9Upgraded Successor
successor cross-reference
successor
FFS86Upgraded Successor
successor cross-reference
successor
090-45099C8-8Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1611200PC89?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1611200PC89?
1611200PC89 is a BOLT,INTERNAL WRENCHING.
What parts can replace 1611200PC89?
There are 3 known substitutes for 1611200PC89: 090-45099C8-9, FFS86, 090-45099C8-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 1611200PC89?
1611200PC89 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-034-1149. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1611200PC89

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026