PartsTable
Technical Data Sheet
16111 ✓ Verified by PartsTable
Trust · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Advanced surge guard with 8 surge-protected power sockets for all 220V equipment<br>- Up to 50% energy saving<br>- Connected devices are turned on/off automatically when switching your PC or TV on/off<br>- Save energy and money: no power waste from unused devices in stand-by or power-on mode<br>- Convenient auto power switching: no need to switch on/off devices manually<br>- Protects PC, TV and other expensive devices against damage from power surges and spikes<br>- 2 additional RJ-11 connections to protect telephone, fax or modem<br>- 10.000 Euro warranty on connected equipment (check conditions on trust.com).<br>- Child safety shutters, built-in automatic fuse and distortion filter for optimal protection. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8546, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 16111
NSN: 3110-00-144-8546
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
height0.880 INCHES NOMINAL IN
starterNOT REQUIRED
materialSTEEL CORROSION RESISTING OVERALL
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_width0.375 INCHES NOMINAL IN
bore_shapeSTRAIGHT
drive_typeDIRECT
ring_styleINTERNAL
scale_typeLINEAR SINGLE SCALE
body_height0.375 INCHES NOMINAL IN
body_length0.475 INCHES MAXIMUM IN
drive_ratio15.0 SINGLE
NSN3110-00-144-8546
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 16111 · Trust ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
LUBRICATION MATERIAL: LUBRICANT
SURFACE FINISH: GROUND
LOAD DIRECTION: RADIAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
BORE DIAMETER: 55.00 MILLIMETERS NOMINAL MM
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALLUBRICANT
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH11.00 MILLIMETERS NOMINAL MM
BORE DIAMETER55.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER90.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
14024Interchangeable
interchangeable cross-reference
interchangeable
1611-1Interchangeable
interchangeable cross-reference
interchangeable
02B106-3Interchangeable
interchangeable cross-reference
interchangeable
109P10396Interchangeable
interchangeable cross-reference
interchangeable
Y00015456Interchangeable
interchangeable cross-reference
interchangeable
1-223225Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16111?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16111?
16111 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Trust. It is classified as a MRO (MRO_GENERAL).
What parts can replace 16111?
There are 13 known substitutes for 16111: 14024, 1611-1, 02B106-3 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16111?
16111 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16111