PartsTable
Technical Data Sheet
PartsTable / MRO / 1611-28

1611-28 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL OVERALL, body_length: 2.500 INCHES NOMINAL IN, body_diameter: 1.906 INCHES NOMINAL IN, hole_diameter: 0.750 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED. This part is cataloged in the Federal Logistics Information System under NSN 5310-00-699-1269, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1611-28
NSN: 5310-00-699-1269
FSC: 5310
CAGE: 44940 — CUMMINS POWER GENERATION INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_length2.500 INCHES NOMINAL IN
body_diameter1.906 INCHES NOMINAL IN
hole_diameter0.750 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
terminal_length1.500 INCHES NOMINAL IN
overall_diameter1.297 INCHES NOMINAL IN
style_designatorAXIAL TERMINAL EACH END
electrical_resistance800.000 OHMS
reliability_indicatorNOT ESTABLISHED
center_hole_shape_styleROUND
NSN5310-00-699-1269
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1611-28 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 1.297 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER1.297 INCHES NOMINAL IN
HOLE DIAMETER0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
995-3A2200InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
313-001-053InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3X2250InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS3108R14S7PXInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-C-5015InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
620303InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1611-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1611-28?
1611-28 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1611-28?
There are 27 known substitutes for 1611-28: 995-3A2200, 313-001-053, 3X2250 and 24 more. Substitute compatibility should be verified for your specific system.
Is 1611-28 still available?
1611-28 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1611-28

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026