PartsTable
Technical Data Sheet
1611-1 ✓ Verified by PartsTable
Trust · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Advanced surge guard with 8 surge-protected power sockets for all 220V equipment<br>- Up to 50% energy saving<br>- Connected devices are turned on/off automatically when switching your PC or TV on/off<br>- Save energy and money: no power waste from unused devices in stand-by or power-on mode<br>- Convenient auto power switching: no need to switch on/off devices manually<br>- Protects PC, TV and other expensive devices against damage from power surges and spikes<br>- 2 additional RJ-11 connections to protect telephone, fax or modem<br>- 10.000 Euro warranty on connected equipment (check conditions on trust.com).<br>- Child safety shutters, built-in automatic fuse and distortion filter for optimal protection. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8546, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 1611-1
NSN: 3110-00-144-8546
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
height0.880 INCHES NOMINAL IN
starterNOT REQUIRED
materialSTEEL CORROSION RESISTING OVERALL
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_width0.375 INCHES NOMINAL IN
bore_shapeSTRAIGHT
drive_typeDIRECT
ring_styleINTERNAL
scale_typeLINEAR SINGLE SCALE
body_height0.375 INCHES NOMINAL IN
body_length0.475 INCHES MAXIMUM IN
drive_ratio15.0 SINGLE
NSN3110-00-144-8546
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1611-1 · Trust ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
LUBRICATION MATERIAL: LUBRICANT
SURFACE FINISH: GROUND
LOAD DIRECTION: RADIAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
BORE DIAMETER: 55.00 MILLIMETERS NOMINAL MM
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALLUBRICANT
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH11.00 MILLIMETERS NOMINAL MM
BORE DIAMETER55.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER90.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
14024Interchangeable
interchangeable cross-reference
interchangeable
1611-1Interchangeable
interchangeable cross-reference
interchangeable
02B106-3Interchangeable
interchangeable cross-reference
interchangeable
109P10396Interchangeable
interchangeable cross-reference
interchangeable
Y00015456Interchangeable
interchangeable cross-reference
interchangeable
1-223225Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1611-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1611-1?
1611-1 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Trust. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1611-1?
There are 13 known substitutes for 1611-1: 14024, 1611-1, 02B106-3 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1611-1?
1611-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1611-1