PartsTable
Technical Data Sheet
Download PDF

161022PC8 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

161022PC8: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, hardness_rating: 23.0 ROCKWELL C NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-275-9385, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
161022PC8
NSN: 5310-00-275-9385
FSC: 5310 — Nuts and Washers
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
hardness_rating23.0 ROCKWELL C NOMINAL
thread_directionRIGHT-HAND
width_across_flats1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch16
nondefinitive_spec/std_dataA TYPE AND B CLASS
NSN5310-00-275-9385
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 161022PC8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
HARDNESS RATING: 23.0 ROCKWELL C NOMINAL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY OVER-ALL HEIGHT
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND B CLASS
•
NUT HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
THREAD SERIESUNF
HARDNESS RATING23.0 ROCKWELL C NOMINAL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY OVER-ALL HEIGHT
NONDEFINITIVE SPEC/STD DATAA TYPE AND B CLASS
NUT HEIGHT0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 1
MILB857CLASSBTYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 161022PC8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 161022PC8?
161022PC8 is a NUT,PLAIN,HEXAGON.
What parts can replace 161022PC8?
There is 1 known substitute for 161022PC8: MILB857CLASSBTYPEA. Substitute compatibility should be verified for your specific system.
What is the NSN for 161022PC8?
161022PC8 is cataloged in the U.S. Government catalog under NSN 5310-00-275-9385. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 161022PC8