PartsTable
Technical Data Sheet
Download PDF

161-004-9001 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

161-004-9001: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_diameter: 0.156 INCHES NOMINAL IN, overall_height: 0.438 INCHES NOMINAL IN, style_designator: FLAT TOP COUNTERBORED, first_counterbore_depth: 0.156 INCHES NOMINAL IN, first_counterbore_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-010-2145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
161-004-9001
NSN: 5340-01-010-2145
FSC: 5340 — Hardware, Commercial
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialRUBBER
hole_diameter0.156 INCHES NOMINAL IN
overall_height0.438 INCHES NOMINAL IN
style_designatorFLAT TOP COUNTERBORED
first_counterbore_depth0.156 INCHES NOMINAL IN
first_counterbore_diameter0.312 INCHES NOMINAL IN
outside/top_flange_diameter0.625 INCHES NOMINAL IN
NSN5340-01-010-2145
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 161-004-9001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 0.625 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.156 INCHES NOMINAL IN
•
MATERIAL: RUBBER
•
HOLE DIAMETER: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.438 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.625 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER0.312 INCHES NOMINAL IN
STYLE DESIGNATORFLAT TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.156 INCHES NOMINAL IN
MATERIALRUBBER
HOLE DIAMETER0.156 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 161-004-9001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 161-004-9001?
161-004-9001 is a BUMPER.
What is the NSN for 161-004-9001?
161-004-9001 is cataloged in the U.S. Government catalog under NSN 5340-01-010-2145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 161-004-9001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.