PartsTable
Technical Data Sheet
Download PDF

160D960254-5 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

160D960254-5: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, end_radius: 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, fork_depth: 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, shank_length: 2.655 INCHES MINIMUM AND 2.675 INCHES MAXIMUM IN, hole_diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, overall_width: 0.401 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-049-1132, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
160D960254-5
NSN: 5340-01-049-1132
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
end_radius0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
fork_depth0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
shank_length2.655 INCHES MINIMUM AND 2.675 INCHES MAXIMUM IN
hole_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
overall_width0.401 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
shank_diameter0.287 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
fork_span_width0.280 INCHES NOMINAL IN
style_designatorCLEVIS
fork_arm_thickness0.260 INCHES NOMINAL IN
material_document_and_classificationFED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end3.445 INCHES MINIMUM AND 3.485 INCHES MAXIMUM IN
NSN5340-01-049-1132
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 160D960254-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.287 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.280 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.260 INCHES NOMINAL IN
•
END RADIUS: 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SHANK LENGTH: 2.655 INCHES MINIMUM AND 2.675 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.287 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
FORK SPAN WIDTH0.280 INCHES NOMINAL IN
FORK ARM THICKNESS0.260 INCHES NOMINAL IN
END RADIUS0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SHANK LENGTH2.655 INCHES MINIMUM AND 2.675 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.401 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
MATERIALSTEEL COMP 303 OVERALL
FORK DEPTH0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 160D960254-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 160D960254-5?
160D960254-5 is a CLEVIS,ROD END.
What is the NSN for 160D960254-5?
160D960254-5 is cataloged in the U.S. Government catalog under NSN 5340-01-049-1132. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 160D960254-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.