160D950827-715: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 17.200 INCHES NOMINAL IN, length: 20.940 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-501-7151, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 17.200 INCHES NOMINAL IN |
| length | 20.940 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-501-7151 |
| LENGTH | 20.940 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | ROUGHLY RECTANGULAR; RIGHT/SHORT EDGE HAS 3 CUTOUTS: 1.26WX1.24H, 2.16 FROM BOTTOM AND 3.30WX4.86H, 5.00 FROM BOTTOM; FAR SIDE HAS CUTOUT 1.90DX3.50HX4.90W, 9.10 FROM BOTTOM RIGHT AND CUTOUT 4.90WX3.50HX1.08D, 9.10 FROM BOTTOMLEFT EDGE AND TRAPEZOIDAL CUTOUT WITH BASE 4.00WX12.80L AND TOP 2.00WX12.80L AND HEIGHT OF 1.50 INCH RUNNING CROSSWISE, STARTING 3.60 FROM RIGHT EDGE AND 2.16 FROM BOTTOM; NEAR SIDE HAS GROOVE 2.15WX2.36D ALONG TOP EDGE AND GROOVE 2.32WX2.00D ALONG TOP EDGE AND HAS TRIANGULAR STRIP CUT OFF TOP RIGHT EDGE BETWEEN CROSSWISE GROOVES, 4.90 FROM RIGHT TO DEPTH OF 1.90 ON RIGHT EDGE AND SIMILAR PIECE CUT OFF LEFT EDGE - SEE DRAWING; NEAR SIDE IS MARKED "UP" AND "AFT" NEAR TOP CENTER AND WITH PART NUMBER IN CENTER OF BOTTOM GROOVE W |
| WIDTH | 17.200 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |