160D950827-615: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 17.200 INCHES NOMINAL IN, length: 20.890 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-0573, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 17.200 INCHES NOMINAL IN |
| length | 20.890 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-0573 |
| LENGTH | 20.890 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH CUTOUTS ON RIGHT/SHORT EDGE: 1.25WX1.00H, 2.20 INCHES FFROM BOTTOM EDGE AND 1.25WX3.5H AT TOP CORNER; NEAR SIDE HAS 0.40 TAPER ON TOP EDGE AND ROUNDED CUTOUT WITH 2.00 IN. DIAM CENTERED 8.94 FROM BOTTOM LEFT EDGE SLANTING UP TO TOP SURFACE 4.50 IN. FROM LEFT EDGE; FAR SIDE HAS OVAL CUTOUT CENTERED 9.00 FROM UN-NOTCHED EDGE AND 10.94 FROM BOTTOM EDGE, A GROOVE 3.50WX1.80D ALONG TOP EDGE, AND A GROOVE 2.00WX2.00D ALONG BOTTOM EDGE, AND A TRIANGULAR CUTOUT 1.25W FROM FAR SIDE SURFACE, 13.70 FROM BOTTOM EDGE TO TOP SURFACE, 8.40 FROM BOTTOM EDGE AND HAS MARKINGS: "UP AFT" IN TOP GROOVE NEAR UN-NOTCHED EDGE AND PART NUMBER CENTERED ABOVE BOTTOM GROOVE W |
| WIDTH | 17.200 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.